No products in the cart.
🔌 In-House iPad Micro-Soldering Specialists
Same-Day iPad Charging Port Repair & Micro-Soldering in Lewisville, TX
Cable falls out, charges only at an angle, or iPad won’t turn on at all? Unlike iPhones, iPad charging ports are micro-soldered directly to the motherboard with up to 36 tiny pins. We perform free pocket-lint micro-cleaning, logic board port micro-soldering, and USB-C / Lightning replacements with a 30-day warranty!
My Cell Phone Repair — Convenient Walk-In Store
🏬 TitleMax Plaza • Suite 102
Located at 413 E Round Grove Rd, Suite 102, Lewisville, TX 75067 (next to Charleys Cheesesteaks & Velvet Box)
Free front-row parking right at our front door. Walk-ins always welcome for same-day 20–30 min service with a 30-day warranty! Serving Lewisville, Flower Mound, Highland Village, Carrollton, and Coppell.
🏷️ Quick iPad Connector & Model Selection:
Free Microscope Lint Inspection Before Any Part Replacement
Before replacing any hardware, our technicians inspect your iPad port under a stereomicroscope. Often, compacted backpack lint or pencil shavings jam the charging pins. We clean it out in 5 minutes with anti-static micro-tools—saving you the cost of a full repair!
Why Most Repair Shops Turn Away Broken iPad Charging Ports
Unlike an iPhone where the port simply screws in with a modular ribbon cable, iPad ports (especially on iPad 6, 7, 8, 9, iPad Mini, and Air) are soldered directly to the main logic board. Most phone repair shops lack micro-soldering tools and tell customers their iPad is junk. We solder them in-house every day with zero data loss!
Common iPad Charging Symptoms We Fix
We diagnose and resolve all hardware and power management IC issues.
Cable Wiggles or Falls Out
The charging cord doesn’t click in snugly and slips out with the slightest touch. Either lint is blocking full insertion or internal retaining latch springs are broken.
Charges Only When Held at an Angle
You have to prop the iPad against a wall or wrap the cable tightly to get the lightning bolt icon. This confirms fractured solder joints on the logic board.
Slow Charging / “Not Charging” Alert
Plugged in overnight but battery only reaches 25%, or status bar says “Not Charging”. Caused by burned power transfer pins or faulty Hydra / Tristar IC chips.
Broken Cable Tip Snapped Inside Port
Third-party cable heads snap off flush with the port opening. We safely extract snapped metal tips under microscope without damaging internal copper contacts.
All iPad Models & Connector Types Serviced
Full support across modern USB-C and classic Lightning iPads.
USB-C Connector
iPad Pro 13″ & 11″ (M4 / M2)
iPad Pro 13″ & 11″ (M4 / M2)
Thunderbolt / USB-C Port • Fast Charge Tested
⚡ Same-Day Service
Repair Pro Port
USB-C Connector
iPad Air 13″ & 11″ (M2 / 5th / 4th)
iPad Air 13″ & 11″ (M2 / 5th / 4th)
USB-C High-Speed Port • Micro-Soldered Joint
⚡ Same-Day Service
Repair Air Port
USB-C Connector
iPad 10th Gen (10.9″)
iPad 10th Gen (10.9″)
OEM USB-C Port • Board Micro-Soldering
⚡ Same-Day Service
Repair 10th Gen Port
USB-C Connector
iPad Mini 6 (8.3″)
iPad Mini 6 (8.3″)
USB-C Receptacle • Power IC Diagnostic
⚡ Same-Day Service
Repair Mini 6 Port
Lightning Connector
iPad 9th, 8th & 7th Gen (10.2″)
iPad 9th, 8th & 7th Gen (10.2″)
36-Pin Lightning Board Micro-Soldering
⚡ Same-Day Service
Repair 9th/8th Port
Lightning Connector
iPad 6th Gen / Mini 5 / Air 3
iPad 6th Gen / Mini 5 / Air 3
Direct Motherboard Lightning Soldering
⚡ Same-Day Service
Repair Lightning Port
🛠️ Related Repair Services at My Cell Phone Repair:
Frequently Asked Questions — iPad Charging Port Repair
Straight answers regarding iPad charging issues and board-level repairs.
❓ How long does an iPad charging port repair take?
Free lint cleaning takes only 5 to 10 minutes. If the internal port pins are bent, burned, or severed, complete board-level micro-soldering replacement takes 1 to 2 hours same-day.
❓ Will I lose my iPad photos, schoolwork, or apps?
Zero data loss! Charging port micro-soldering is strictly a power-rail hardware fix. Your iPad storage, user profiles, photos, and apps remain 100% safe.
❓ What if the iPad still won’t charge after replacing the port?
If an iPad was plugged into a cheap vehicle charger or suffered a power surge, the logic board’s Tristar / Hydra charging controller IC chip may be damaged. We diagnose and replace these BGA power management chips under our microscope.
❓ Do you offer a warranty on iPad port repairs?
Yes! All iPad charging port replacements and soldering repairs are backed by our 30-day warranty covering parts and certified technician labor.
Get Your iPad Charging at Full Speed Again!
Stop bending cables or waiting hours for a 1% charge. Visit our Lewisville lab for a free diagnostic and fast same-day fix!