No products in the cart.
🎮 Board-Level Micro-Soldering • PS5, Xbox & Switch Specialists
Same-Day PS5, Xbox & Game Console HDMI Port Repair in Lewisville, TX
TV says “No Signal”, pins crushed inside the port, screen flickering, or console stuck on White Light of Death? We specialize in precision motherboard micro-soldering, trace restoration, and OEM HDMI 2.1 replacements for PlayStation 5 (Pro, Slim, Original), PS4, Xbox Series X/S, and Nintendo Switch. Tested live at 4K 120Hz HDR with a 30-day warranty!
🏷️ Quick Console Selection & Hardware Tags:
Don’t Keep Forcing Your HDMI Cable!
If internal pins are bent or the port is wobbly, repeatedly pushing the cable can bridge the 5V power rail with high-speed data lines, frying your motherboard’s HDMI Retimer / Encoder IC chip or tearing delicate PCB solder pads. Bring it straight to our Lewisville lab for a safe microscope extraction.
Common Console HDMI Failures We Repair
We diagnose and resolve all board-level video transmission faults across Sony, Microsoft, and Nintendo systems.
Bent, Broken or Missing Gold Pins
Cables tugged accidentally, consoles dropped while plugged in, or inserting the cable upside down pushes pins back into the casing, causing instant loss of video signal.
“No Signal” / White Light of Death
Your PS5 turns on with a solid white light (meaning the APU booted properly), but the TV screen stays completely black. This confirms an HDMI pathway disconnect.
Blown HDMI Retimer / Encoder Chip
Even if the physical port looks pristine, a summer lightning storm or static surge can destroy the Panasonic MN864729 or Texas Instruments retimer IC. We replace it via precision BGA micro-soldering.
Resolution Stuck at 480p or Flickering
Display flickers at 1080p, produces colored static “snow”, or will not negotiate 4K 120Hz HDR. Caused by cracked solder joints on differential TMDS / FRL signal filters.
Ripped or Torn Motherboard Solder Pads
Attempted DIY repairs or severe drops can rip copper pads right off the PCB. Our micro-soldering specialists run 0.02mm insulated jumper micro-wires to fully reconstruct broken traces.
Nintendo Switch Dock No Display
Switch charges handheld but won’t project to the TV when docked. We solder genuine USB-C 3.1 dual-row charging ports and replace faulty PI3USB video control chips.
All PlayStation & Xbox Models Serviced Same-Day
Every console model has specific port pinouts and thermal configurations. We stock OEM parts for all generations.
Sony PlayStation
PlayStation 5 Pro
PlayStation 5 Pro
Ultra High-Speed HDMI 2.1 • 4K 120Hz & 8K Support
⚡ 1-2 Hours Same-Day
Repair PS5 Pro Port
Sony PlayStation
PS5 Slim (Disc & Digital)
PS5 Slim (Disc & Digital)
Compact Motherboard • HDMI 2.1 Micro-Soldering
⚡ 1-2 Hours Same-Day
Repair PS5 Slim Port
Sony PlayStation
PS5 Original (Fat Model)
PS5 Original (Fat Model)
Original CFI-1000/1100/1200 • Liquid Metal Check
⚡ 1-2 Hours Same-Day
Repair PS5 Port
Sony PlayStation
PS4 Pro & PS4 Slim
PS4 Pro & PS4 Slim
HDMI 2.0 Port • Retimer IC • APU Re-Pasting
⚡ Same-Day Service
Repair PS4 Port
Microsoft Xbox
Xbox Series X
Xbox Series X
HDMI 2.1 40Gbps • VRR & 120Hz • Heavy-Duty Port
⚡ 1-2 Hours Same-Day
Repair Series X Port
Microsoft Xbox
Xbox Series S
Xbox Series S
Compact Series S HDMI 2.1 • PSU Check
⚡ 1-2 Hours Same-Day
Repair Series S Port
Microsoft Xbox
Xbox One X & One S
Xbox One X & One S
HDMI Out Port • Retimer Chip • Hard Drive Check
⚡ Same-Day Service
Repair Xbox One Port
Nintendo Switch
Switch OLED & Standard
Switch OLED & Standard
USB-C Charging & Dock Output • PI3USB Video IC
⚡ Same-Day Service
Repair Switch Video
Why Our Console Micro-Soldering Lasts Longer
Factory solder is brittle and snaps under moderate cable tension. We rebuild it stronger than new.
1
Clean-Room Teardown & Microscope Inspection
Your console is carefully disassembled in an ESD-safe workspace. We inspect the motherboard under high-magnification stereomicroscopes to evaluate pin condition, trace continuity, and surrounding EMI filter arrays.
2
Precision Hot-Air Desoldering & Pad Cleaning
Using controlled temperature-profile hot air, we cleanly lift the damaged port without thermal stress to nearby multi-layer PCB ground planes. We wick away old factory solder and restore every contact pad.
3
Reinforced Leaded Solder Alloy Installation
Unlike factory lead-free solder which is brittle, our 63/37 alloy provides superior mechanical flexibility. When you plug and unplug your HDMI cable, the solder flexes rather than snapping off the board.
4
Live 4K 120Hz HDR Gameplay Verification
We test every repaired console on our high-refresh-rate 4K gaming displays. We verify full 4K output, 120Hz refresh rate, VRR (Variable Refresh Rate), and HDR handshake before reassembly.
PS5 Overheating or Shutting Down After 20 Minutes?
If your PS5 roars like a jet engine or shuts off abruptly during graphic-heavy games (Call of Duty, GTA, Spider-Man), the factory liquid metal has oxidized into a dry spot on the APU die, or heatsink channels are choked with dust. Ask to bundle a Full Liquid Metal Decontamination & Thermal Service while your console is in our shop!
My Cell Phone Repair — Convenient Walk-In Store
🏬 TitleMax Plaza • Suite 102
Located at 413 E Round Grove Rd, Suite 102, Lewisville, TX 75067 (next to Charleys Cheesesteaks & Velvet Box)
Free front-row parking right at our front door. Walk-ins always welcome for same-day 20–30 min service with a 30-day warranty! Serving Lewisville, Flower Mound, Highland Village, Carrollton, and Coppell.
🛠️ Related Repair Services at My Cell Phone Repair:
Frequently Asked Questions — Game Console HDMI Repair
Honest answers to the most common questions gamers ask before bringing in their system.
❓ How long does a PS5 or Xbox HDMI port replacement take?
Most HDMI port micro-soldering replacements take between 1 to 2 hours same-day when dropped off during business hours. We carry genuine OEM replacement ports in stock for all PS5, Xbox Series X/S, and PS4 models.
❓ Do I need to bring my power cables or controllers?
No! You only need to bring the console unit itself. Our Lewisville laboratory has official power cables, 4K 120Hz test displays, and controllers to test your system thoroughly.
❓ Can you fix an HDMI port if the green motherboard pads are ripped off?
Yes! Even if the console suffered a severe fall or a previous shop attempted an improper repair and tore the copper traces off the board, our technicians rebuild individual 0.02mm micro-traces using insulated jumpers.
❓ Will I lose my saved games, user accounts, or downloaded games?
Zero data loss! HDMI port replacement and retimer chip micro-soldering are strictly video-output hardware repairs. Your internal SSD, save data, and game libraries remain 100% untouched.
❓ What is the difference between a broken HDMI port and a bad retimer chip?
A physically broken port has visible bent pins or feels loose when plugging in the cable. A damaged retimer chip looks physically fine on the outside, but will not send a video signal to the TV (often caused by electrical surges or static through the cable). We test both during diagnosis.
❓ What kind of warranty do you provide?
All game console HDMI port repairs and micro-soldering services include our 30-day warranty covering all parts and certified technician labor.
Get Back in the Game Today — Fast Walk-In Service!
Don’t spend $500+ on a replacement console. Our Lewisville micro-soldering team will restore your HDMI port with full 4K 120Hz video today!